1、High Temperature Teflon Tubing Introduction
High Temperature Teflon Tubing has two types, namely molded tube and pressed tube. The pressed tube is used as corrosive fluid tube, insulating sheath and transmission shaft covering, while molded tube may be machined into various non-standard parts and used as non-adhesive material.
2、Product parameter
Technical parameter | Unit | Standard | Remarks |
Specific gravity | g/cm3 | 2.3 | (7 kgcm3 3mmin) |
Tensile elongation | Mpa | 13.72-34.3 | |
Elongation | % | 150-400 | |
Compressive strength | Mpa | 12 | |
Shore hardness | DO5-55 | ||
Dynamic friction coefficient | 0.06 | ||
Breakdown voltage | Kv/mm | 19 | |
Strong/weak acid/alkali effect | None | ||
Temperature | ℃ | -200 - 260 |
3、Application scope
Chemical, aerospace equipments, artificial blood vessel and organ, medical equipments, electronics and hydraulic tubing
http://www.yihaoptfe.com/